Productinformatie
The Bebob ML-120 is a hot swap adapter for ARRI Alexa Mini and ARRI Alexa Mini LF. The V-Mount adapter draws a maximum of 15A and powers the camera without interruption for 120s. The adapter weighs only 0.52kg.
Charging
The ML-120 charges itself from the V-Mount battery. At first charge or If completely empty, the ML-120 will be ready to use after 60 minutes. While Charging the yellow "Charging" LED turns on. When fully charged the green “Ready“ LED turns on. The ML-120 charges itself automatically when needed. During charging The ML-120 keep monitoring the voltage of the battery and is ready to switch if needed.
Battery Swap
The ML-120 detects a battery as empty when the voltage drops below 12,5V. The ML-120 instantly takes over powering the ARRI Alexa Mini and the D-Tap port for a maximum of 2 minutes and displays a red LED alarm. The LED Alarm flashes for 90s and turns to solid for the last 30s. After the empty battery has been replaced by a charged one (voltage under load of over 14,5V), powering of the ARRI Alexa Mini instantly reverts to the V-Mount battery.
The ML-120 switches up to 6 Times before running empty. If the empty battery is not replaced within 2 minutes the ML-120ALEX MINI and the ARRI Alexa Mini will switch off.
Alarm LED´s brightness
To allow the Alarm LED to be visible in bright environments (sunlight etc.) but not disturbingly over bright in darker environments (studio etc.), the ML-120 has automatic brightness adjust. The brighter the environment the brighter the alarm LED will show. The environment light detector is located at the top – middle of the ML-120 housing.
Covering the housing (with tape for instance) will switch off the automatic brightness adjust and the alarm LED will flash with minimum brightness
Safety instructions
Only for professional use! Keep Charger out of reach of children and personnel that has not been instructed in the use! Use only with recommended batteries. Keep the ML-120 dry and do not immerse in water. Do not attempt to open or repair the ML-120V7V. Contact your dealer for help if it becomes defective. Handle with care! Do not throw! Do not drop!
Charging
The ML-120 charges itself from the V-Mount battery. At first charge or If completely empty, the ML-120 will be ready to use after 60 minutes. While Charging the yellow "Charging" LED turns on. When fully charged the green “Ready“ LED turns on. The ML-120 charges itself automatically when needed. During charging The ML-120 keep monitoring the voltage of the battery and is ready to switch if needed.
Battery Swap
The ML-120 detects a battery as empty when the voltage drops below 12,5V. The ML-120 instantly takes over powering the ARRI Alexa Mini and the D-Tap port for a maximum of 2 minutes and displays a red LED alarm. The LED Alarm flashes for 90s and turns to solid for the last 30s. After the empty battery has been replaced by a charged one (voltage under load of over 14,5V), powering of the ARRI Alexa Mini instantly reverts to the V-Mount battery.
The ML-120 switches up to 6 Times before running empty. If the empty battery is not replaced within 2 minutes the ML-120ALEX MINI and the ARRI Alexa Mini will switch off.
Alarm LED´s brightness
To allow the Alarm LED to be visible in bright environments (sunlight etc.) but not disturbingly over bright in darker environments (studio etc.), the ML-120 has automatic brightness adjust. The brighter the environment the brighter the alarm LED will show. The environment light detector is located at the top – middle of the ML-120 housing.
Covering the housing (with tape for instance) will switch off the automatic brightness adjust and the alarm LED will flash with minimum brightness
Safety instructions
Only for professional use! Keep Charger out of reach of children and personnel that has not been instructed in the use! Use only with recommended batteries. Keep the ML-120 dry and do not immerse in water. Do not attempt to open or repair the ML-120V7V. Contact your dealer for help if it becomes defective. Handle with care! Do not throw! Do not drop!